Table of Contents
Advertisement
70
71
72
73
74
75
Table 2
RAID Controller Event Codes
© 2003, Adaptec, Inc.
Name
MLXEV_PHYSDEV_PORT_FAILED
Description Physical disk port has failed or cannot operate at the configured channel
speed.
Cause
Physical disk hardware failure.
Physical disk is not compatible with system.
Enclosure disk slot hardware failure.
Action
Replace physical disk.
Replace disk enclosure.
Address
ctl: 0 chn: 13 tgt: 14
Severity
2 (Error)
Source
ExPro
Name
MLXEV_CTLDEV_MIRROR_RACE_ENTRY_FAILED
Description Mirror race recovery failed for logical drive.
Cause
A read or write operation to a physical disk failed while restoring
redundancy.
Action
Run consistency check and restore consistency.
Address
ctl: 0 logdrv: 15
Severity
2 (Error)
Source
ExPro
Name
MLXEV_CTLDEV_CTRL_PARAMS_CHECKSUM_FAILED
Description Controller parameters checksum verification failed; restored default.
Cause
NVRAM battery low.
NVRAM hardware failure.
Improper shutdown of the controller during controller parameter
update.
Action
Restore correct controller parameter settings.
If problem persists, replace controller.
Address
ctl: 0
Severity
2 (Error)
Source
InPro
Name
MLXEV_FIRMWARE_UPGRADE_STARTED
Description Online controller firmware upgrade has started.
Cause
User has initiated an online firmware upgrade.
Action
None
Address
ctl: 0
Severity
4 (Information)
Source
ExPro
Name
MLXEV_FIRMWARE_UPGRADE_COMPLETE
Description Online controller firmware upgrade has completed successfully.
Cause
Online controller firmware upgrade has completed without error.
The partner controller will now be auto flashed.
Action
None
Address
ctl: 0
Severity
4 (Information)
Source
ExPro
Name
MLXEV_FIRMWARE_UPGRADE_FAILED
Description Online controller firmware upgrade has failed.
Cause
Online controller firmware upgrade has failed.
The original firmware will be reloaded.
Action
Use the offline method to load the new firmware.
Address
ctl: 0
Severity
2 (Error)
Source
ExPro
143
Advertisement
Table of Contents
