Table of Contents
Advertisement
If you want to start over, click Cancel and reopen the dialog box.
When you have finished creating the disk arrays, click Next or the Create Logical Drive tab to continue your
configuration.
The Create Logical Drive Tab displays.
Figure 65
Manual Storage Configuration: Create Logical Drive Tab
The Create Logical Drives Tab is where you configure your disk arrays into logical drives. You must create at least one
logical disk on each array. A maximum of 32 logical drives can be created per controller. Perform the following:
From the Display Capacity drop-down list (next to the Refresh button), select how you would like the capacity
displayed.
Select the array that you want to configure.
Click New Logical Drive to create a logical drive.
From the RAID drop-down list, select a RAID level. Supported RAID levels are JBOD, RAID 0, RAID 1, RAID 3,
RAID 5, RAID 0+1, RAID10, RAID 30, RAID 50. Only RAID levels compatible with the current array are available in
the list.
95
© 2003, Adaptec, Inc.
Advertisement
Table of Contents
