A Completing A Silent Windows Installation; Completing A Silent Installation - Adaptec Storage Manager User Manual

Completing a Silent Installation

You will need the Adaptec RAID Controller Installation DVD to complete this task.
To complete a silent installation:
1
Insert the DVD into your DVD drive.
2
Open a command prompt window and change to the DVD directory.
3
Run the silent installation from the command line using one of these files, as appropriate:
setup asm x64.exe or setup asm x86.exe. For example:
setup asm x86.exe /s /v" /qn <properties>"
where <properties> is one or more of the options listed in
on page 152.
Separate properties with spaces; separate feature names for the ADDLOCAL property with
commas (see examples on
Note:
Synchronous Installation—To install Adaptec Storage Manager so that the .exe file does
not close until the installation is complete, add the /w parameter to the .exe file and run the
application with the start /WAIT command as shown in this example:
start /WAIT setup asm x64.exe /w /s /v" /qn <OPTIONS>"
You might want to do this for a batch file installation so that the setup will not return until
the installation is finished.
After a minute or two, the silent installation should be complete and the Adaptec Storage
Manager icon should be accessible. Continue with
Appendix A: Completing a Silent Windows Installation
page 152).
Building Your Storage Space on page
●
Available Properties and Values
26.
151