Table of Contents
Advertisement
name="sgen" class="scsi" target=1 lun=0;
name="sgen" class="scsi" target=1 lun=1;
name="sgen" class="scsi" target=1 lun=2;
name="sgen" class="scsi" target=1 lun=3;
name="sgen" class="scsi" target=1 lun=4;
name="sgen" class="scsi" target=1 lun=5;
name="sgen" class="scsi" target=1 lun=6;
name="sgen" class="scsi" target=1 lun=7;
name="sgen" class="scsi" target=2 lun=0;
name="sgen" class="scsi" target=2 lun=1;
name="sgen" class="scsi" target=2 lun=2;
name="sgen" class="scsi" target=2 lun=3;
name="sgen" class="scsi" target=2 lun=4;
name="sgen" class="scsi" target=2 lun=5;
name="sgen" class="scsi" target=2 lun=6;
name="sgen" class="scsi" target=2 lun=7;
name="sgen" class="scsi" target=3 lun=0;
name="sgen" class="scsi" target=3 lun=1;
name="sgen" class="scsi" target=3 lun=2;
name="sgen" class="scsi" target=3 lun=3;
name="sgen" class="scsi" target=3 lun=4;
name="sgen" class="scsi" target=3 lun=5;
name="sgen" class="scsi" target=3 lun=6;
name="sgen" class="scsi" target=3 lun=7;
Reboot the system to reconfigure the environment to include the dev links for the devices that you entered in the
sd.conf file:
reboot -- -r
Verify that sgen is loaded properly by running the following command on the server system:
/usr/sbin/devfsadm -v -i sgen
A non-zero return code indicates that sgen is not properly loaded.
Check /dev/scsi/direct to verify that sgen was properly loaded.
Server Component
2.6.2
Verify or perform the following after installing the server and client components:
1
Edit the /etc/appache/httpd.conf file and ensure that the ServerName and alias are correct. For more information,
see A.1.4 Solaris - Manually Configuring an Apache HTTP Web Server on page 210.
2
Edit the /etc/hosts file and ensure that it contains:
An entry for the server itself. The default setting is the loopback value of 127.0.0.1 for the name localhost.
The static IP address and name of the Spheras Storage Director Server. (This is necessary for Spheras Storage
Director Clients to communicate with the server.)
3
Verify your HTTP server installation by stopping and restarting your HTTP server:
Open a Terminal Window and type the following (these examples assume that you accepted the default path during
installation):
cd /etc/apache2/bin
then type,
./apachectl stop
followed by:
./apachectl start
40
Spheras Storage Director Installation and User Guide
Advertisement
Table of Contents
