To delete a server, follow these steps:
1
Select a server from the navigation area or the content area.
Figure 25
Deleting a Server Warning
2
From the menu bar, click Server->Delete or Right-click the server->Delete. A warning dialog box opens.
3
Click Yes to delete the selected server or click No to close the dialog box without deleting a server.
3.5
Logging off of Spheras Storage Director
You should leave the Spheras Storage Director running as long as there are servers that you want to monitor or
configure. If you exit Spheras Storage Director, you will be unable to receive events, or be informed, of errors or status,
unless you restart the Spheras Storage Director.
To exit, click File->Close in the browser you are using.
3.6
Replicating a Server
Replication is similar to making a copy. This process sends a list of all the servers and the server groups that are seen on
the client workstation to each of those servers. The servers receiving this list use it to update the current servers and
server group lists. Therefore, if you run Spheras Storage Director from any of the servers, you see the same list of
servers and server groups.
Replication provides an easy way to keep a consistent set of servers and server groups that are defined across all Spheras
Storage Director Servers without having to configure each server independently.
To replicate an entire set of servers and server groups, follow these steps:
© 2003, Adaptec, Inc.
51