Removing And Replacing The Air Baffle - HP ProLiant DL345 Gen10 Plus Maintenance And Service Manual

Removing and replacing the air baffle

Removing and replacing the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or CAUTION:
blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Procedure Procedure
1. Power down the server.
2. If installed, release the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
5. Remove the access panel .
6. Remove the air baffle.
To replace the component, reverse the removal procedure.
Removing and replacing the air baffle 92