Assigning Multicast Forward All Parameters - Dell PowerConnect 2816 User Manual

4 Toggle a port to S to join the port to the selected Multicast group.
5 Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
6 Click Apply Changes.
The bridge Multicast address is assigned to the Multicast group, and the device is updated.
Defining Ports to Receive Multicast Service
1 Open the Bridge Multicast Group page.
2 Define the VLAN ID and the Bridge Multicast Address fields.
3 Toggle a port to S to join the port to the selected Multicast group.
4 Toggle a port to F to forbid adding specific Multicast addresses to a specific port.
5 Click Apply Changes.
The port is assigned to the Multicast group, and the device is updated.
Assigning LAGs to Receive Multicast Service
1 Open the Bridge Multicast Group page.
2 Define the VLAN ID and the Bridge Multicast Address fields.
3 Toggle the LAG to S to join the LAG to the selected Multicast group.
4 Toggle the LAG to F to forbid adding specific Multicast addresses to a specific LAG.
5 Click Apply Changes.
The LAG is assigned to the Multicast group, and the device is updated.

Assigning Multicast Forward All Parameters

The Bridge Multicast Forward All page contains fields for attaching ports or LAGs to a device that is
attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets
are forwarded to the appropriate port or VLAN.
To open the Bridge Multicast Forward All page, click Switch→ Multicast Support→ Bridge Multicast
Forward All page in the tree view.
138
Update with your book title