Installing Mass Storage Devices; Introduction - HP LC2000r - NetServer - 128 MB RAM Installation Manual

4 Installing Mass Storage Devices

Introduction

The HP NetServer standard configuration is:
l
One hot-swap mass storage cage (primary)
With requested drives installed
With filler panels in the slots not occupied by drives
l
A flexible disk drive
l
A CD-ROM 32x drive
l
Non-hot-swap mass storage shelves
NOTE
You can install a second hot-swap mass storage cage in the
NetServer. For information, refer to the HP NetServer
LH 3000/3000r and LH 6000/6000r Mass Storage Upgrade
Guide.
Flexible
disk drive
CD-ROM
drive
Non-hot-swap
shelves
Non-hot-swap
drive shelves
Secondary
hot-swap
cage
(optional)
Figure 4-1. Standard Mass Storage Configuration
Primary
hot-swap
cage
39