HP LC2000r - NetServer - 128 MB RAM Installation Manual page 63

Chapter 5
5. Remove the two screws securing the system board assembly to the chassis
(see Figures 5-2 and 5-3).
6. Unlatch the blue retaining latches to release the assembly.
CAUTION
Wear a wrist-strap and use a static-dissipating work surface
connected to the chassis when handling components. Ensure
the metal of the wrist strap contacts your skin.
7. Pull the assembly out until it clears the chassis guides.
CAUTION
The System Board Assembly weighs approximately 20 lbs.
(9 kgs). Support it at the bottom as it is removed from the
chassis.
Figure 5-2. Removing the System Board Assembly from the LH 6000r
Installing Additional Memory
NetServer
55