Chapter 8
Installing the HP NetServer in an HP Rack System/E or Rack System/U
Remove two
screws securing
the NetServer
to the rack.
Do not remove
three screws
securing the
hinge to the
NetServer.
4. Install two screws through the bezel hinge into the rack nuts on the left
column of the rack (see Figure 8-15).
Top Cover
Bottom Cover
Figure 8-13. Bezel Hinge and Latch
Bezel
Hinge
Figure 8-14. Slide Lockout Releases
Remove two
screws securing
the NetServer
to the rack.
Do not remove
two screws
securing the
bracket
to the NetServer.
Right Cover
Lockout
Latch
Bezel
Latch
93