HP LC2000r - NetServer - 128 MB RAM Installation Manual page 98

Chapter 8 Installing the HP NetServer in an HP Rack System/E or Rack System/U
NOTE
The slide members do not come apart and cannot be removed.
4. Remove power supplies and hard disk drives from the server to reduce the
total weight to be lifted.
WARNING Two people are required to move or lift the NetServer. The
HP NetServer LH 6000r weighs up to 175 pounds (80 kg.)
when fully loaded.
5. Lift the HP NetServer by the handles until the handles are above the
extended slide members (see Figure 8-10).
6. Move the HP NetServer toward the rack, between the slide members, until
all four HP NetServer handles are over the slide members.
CAUTION
The HP NetServer must be moved horizontally onto the
extended slides. You cannot lower it onto the slides.
Figure 8-10. Mounting the HP NetServer on the Slides
90
Slide
Members
Handles