Hard Disk Drive Led Indicators - HP LC2000r - NetServer - 128 MB RAM Installation Manual

Chapter 2

Hard Disk Drive LED Indicators

Each disk drive module has two LED indicators: one for status and one for
activity. You can view these LED indicators on the LH 6000 and on the LH 6000r
with the bezel open. For more information on hard drives, see Chapter 4,
"Installing Mass Storage Devices."
Light pipes on the disk drive modules transmit light to the indicators from LEDs
mounted on the hot-swap mass storage cage. Verify that the LED indicators show
the correct status and activity for all of the installed disk drives.
Table 2-3. Disk Drive LED Indicators
Status LED Indicator
Off: Drive not present, or not connected to
the cage
Green: Drive normal
Amber (flashing): Drive failure predicted
Red (fast flashing): Drive fault
Red (solid): Drive power fault
20
Status
Activity
Figure 2-4. Disk Drive LED Indicators
Activity LED Indicator
Off: No Drive activity
Green (flashing): Accessing Drive
Green (solid for more than one
minute): Drive spinning up, or
"hung"
Controls, Ports, and Indicators