Pedestal Installation - HP LC2000r - NetServer - 128 MB RAM Installation Manual

Chapter 1
15. Hook up the monitor, keyboard, and mouse.
Refer to Chapter 9, "Connecting the Monitor, Keyboard, and Mouse."
16. Connect external cables.
17. Power up the HP NetServer.
Refer to Chapter 2, "Controls, Ports, and Indicators."
18. Go to the section "Configuring the HP NetServer" at the end of this
chapter.

Pedestal Installation

Follow the setup steps in the exact order shown below for a successful pedestal
installation. Skip any steps that do not apply to your installation.
CAUTION
Unlock bezel before removing it.
1. As you unpack the shipping box, verify contents against the Contents List
included with your HP NetServer. If anything is missing or damaged, call
your reseller.
Store the empty boxes and packing material in a safe place. This is
especially important if you plan to ship the NetServer elsewhere for final
installation.
4
Setting Up the HP NetServer LH 6000/6000r
Figure 1-3. LH 6000 (Pedestal)