Chapter 13
6. Insert the threaded stud on the rear of the slide into the rear
column-mounting hole marked earlier.
7. Secure the slide with a hex nut and lock washer saved earlier.
8. Repeat steps 1 through 6 and install the second slide in the rack.
Completing the HP NetServer Installation
Installing the HP NetServer on the slides and securing it to the rack completes the
installation of the HP NetServer in the HP Systems rack. Follow the steps
beginning in the section Installing the HP NetServer in Chapter 8, "Installing the
HP NetServer in a HP Rack System/E or Rack System/U," to complete the
installation.
Alternative Rack Mounting
155