Updating Firmware; Using Hp Library & Tape Tools - HP StorageWorks vs80 User Manual

Updating Firmware

Using HP Library & Tape Tools
Chapter 3
Caution Do not power cycle or reset the autoloader during the upgrade
process. Doing so could cause the autoloader to become
inoperable.
You can download autoloader and drive firmware using the HP Library & Tape
Tools diagnostic utility. This utility may already be installed on your server. If
not, you can download it from http://www.hp.com/support/TapeTools.
Online help and instructions are included with HP Library & Tape Tools. The
firmware download procedure involves these simple steps:
1. After downloading and installing Tape Tools, run the HP Library & Tape
Tools utility.
2. If prompted to download new firmware from the website, select [Yes],
otherwise, select [Get Firmware from Web] from the File menu.
3. Click on the desired firmware revisions, and then click the [Download]
button. The firmware file is copied into the HP Library & Tape Tools
firmware folder.
4. When the download is completed, close the Get Firmware from Web
window.
5. Select the autoloader in the [By Product] device list tab, and then select the
[Firmware] button. The latest revision available for the autoloader is
automatically selected.
6. Select [Start Update] to update the firmware for the autoloader.
Autoloader Administration 45