4 Replacement Procedures
4.13 Top Cover with Display Assembly
Removing the Top Cover with Display Assembly
To remove the top cover with display assembly, follow the steps below and refer to figures
4-28 to 4-30.
1. Turn the computer upside down, and remove the following four screws :
Two M2 6 silver screws
Two M2 10 silver flat-head screws
Figure 4-28 Removing four screws from the bottom of the computer
2. Turn the computer right side up and open the display panel.
3. Disconnect the LCD/LED cable from PJ5600.
4-52
4.13 Top cover with Display Assembly
PORTEGE M100 Maintenance Manual (960-452)