Installing The Ips Board And The Palm Rest - Toshiba Portege M100 Maintenance Manual

Personal computer

Hide thumbs Also See for Portege M100:

Table of Contents

4 Replacement Procedures

Installing the IPS Board and the Palm Rest

To install the IPS board and the palm rest, follow the steps below and refer to Figures 4-19 to 4-22.

1. Lay the palm rest upside down.

2. Seat the IPS board and secure it with three M2 3 silver flat-head screws.

3. Connect the IPS cable.

4. Seat the palm rest and secure it with three M2 4 flat-head screws .

5. Turn the computer upside down.

6. Secure the palm rest with three M2 4 silver screws .

4.8 Palm Rest and IPS Board

PORTEGE M100 Maintenance Manual (960-452)

Table of Contents