4 Replacement Procedures
4.8
Palm Rest and IPS Board
Removing the Palm Rest and IPS Board
To remove the palm rest and IPS board, follow the steps below and refer to Figure 4-19 to 4-22.
1. Lay the computer upside down.
2. Remove three M2 4 silver screws securing the palm rest.
3. Turn the computer right side up and open the display so that it lies flat.
Figure 4-19 Removing the screws securing the bottom of the palm rest
4-38
4.8 Palm Rest and IPS Board
PORTEGE M100 Maintenance Manual (960-452)