Toshiba Portege M100 Maintenance Manual page 179

3 Tests and Diagnostics
(d) Hard Disk Mode
Use this item to select the hard disk mode.
Enhanced IDE (Normal)
Standard IDE
NOTE: If you change this setting, you will have to reformat the partition of the hard disk
for the appropriate setting.
15. Legacy Emulation.
(a) USB keyboard/Mouse Legacy Emulation.
Use this option to enable or disable USB keyboard/mouse Legacy Emulation.
Enabled
Disabled
(b) USB-FDD Legacy Emulation.
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled
Disabled
16. PCI LAN
This option sets the enable/disable of the built-in LAN functions.
Enabled
Disabled
3-70
Select this mode when using an operating system that supports
Enhanced IDE. Use this setting normally. (Default)
Select this mode when using an operating system that does not
support the Enhanced IDE. When this mode is selected, up to
528MB is logically available and the rest of the capacity is not
usable.
USB Legacy Support can be used. (Default)
USB Legacy Support cannot be used.
USB Legacy Support can be used. (Default)
USB Legacy Support cannot be used.
Enable Built-in LAN functions. (Default)
Disable Built-in LAN functions.
PORTEGE M100 Maintenance Manual (960-452)
3.23 SETUP