Installing The Antenna Coaxial Cables - Toshiba Portege M100 Maintenance Manual

4.22 Antenna Coaxial Cables

Installing the Antenna Coaxial Cables

To install the antenna coaxial cables, follow the steps below and refer to figure 4-51 to 4-54.
CAUTION: The tip of antenna is like film and is fit in the latch portion. Do not bent or
scrub it. A slight damage may cause break down of tip. Be careful not to
damage it.
1. Route the antenna coaxial cables through the display hinge and seat the plastic brace.
2. Route the LCD/LED cable and seat the LED board.
3. Seat the display hinge in the display panel.
4. Seat the plastic brace and secure it with one M2 3 silver flat-head screw.
CAUTION: When seating the plastic brace, make sure the LCD/LED cable, wireless LAN
antenna and bluetooth antenna are not pinched. Be careful not to damage
them.
5. Secure the display hinge with two M2.5 4 black screws .
PORTEGE M100 Maintenance Manual (960-452)
4 Replacement Procedures
4-81