1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. U305-S2804
  6. User manual

Toshiba Satellite U305-S2804 User Manual

Toshiba satellite u305-s2804: user guide
Hide thumbs Also See for Satellite U305-S2804:
Table of Contents

Advertisement

Quick Links

TOSHIBA Satellite U300 /
Satellite Pro U300 / PORTEGE
M600 / TECRA M8 Series
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite U305-S2804

Summary of Contents for Toshiba Satellite U305-S2804

  • Page 1 TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series User's Manual...
  • Page 2 TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Portable Personal Computer User's Manual First edition March 2007 Ownership and copyright of music, video, computer programs, databases, etc.

  • Page 3: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, serial port,...

  • Page 4: Fcc Conditions

    Contact Address: Telephone: EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary Information: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany.
  • Page 5 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

  • Page 6: Type Of Service

    Spain Switzerland All other countries/ regions Specific switch settings or software setup are required for each network, please refer to the relevant sections of the user guide for more details. The hookflash (timed break register recall) function is subject to separate national type approvals.

  • Page 7: If Problems Arise

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.
  • Page 8 Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
  • Page 9 Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers.

  • Page 10: General Conditions

    ■ When used in the Auto Answer mode, the S0 register must be set with a value of 3 or 4. This ensures: ■ a person calling your modem will hear a short burst of ringing before the modem answers. This confirms that the call has been successfully switched through the network.

  • Page 11: Optical Disc Drive Safety Instructions

    The charge for a Telepermit assessment is $337.50. An additional charge of $337.50 is payable where an assessment is based on reports against non-Telecom New Zealand Specifications. $112.50 is charged for each variation when submitted at the same time as the original. An invoice for $NZ1237.50 will be sent under separate cover.
  • Page 12 Panasonic DVD Super Multi UJ-852M/852B ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 13 HLDS DVD Super Multi GSA-U10N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 14 International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...
  • Page 15 TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä.
  • Page 16 TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series User’s Manual...

  • Page 17: General Precautions

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.

  • Page 18: Instruction Manual For Safety And Comfort

    Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

  • Page 19: Table Of Contents

    Special features ......... . 1-8 TOSHIBA Value Added Package ......1-10 Utilities and Applications.
  • Page 20 Fixed optical media drives ........2-9 Region codes for DVD drive and media ..... . .2-9 Writable discs .
  • Page 21 TOSHIBA Disc Creator ........4-20...
  • Page 22 The Keyboard Chapter 5 Typewriter keys ......... . .5-1 F1 ...
  • Page 23 TOSHIBA support ........

  • Page 24: Specifications

    Specifications Appendix A Display Controller and Modes Appendix B Wireless LAN Appendix C AC Power Cord and Connectors Appendix D Legal Footnotes Appendix E Glossary Index xxiv User’s Manual...

  • Page 25: Preface

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Preface Congratulations on your purchase of the TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high- performance computing.

  • Page 26: Conventions

    Chapter 4, Operating devices: TouchPad, Sound System, optical media drives, modem, wireless communication and LAN. It also provides tips on care of the computer, and CD/DVDs. Chapter 5, the keypad overlay and hot keys. Chapter 6, Power and Power-Up power resources and battery save modes. Chapter 7, HW Setup (Depends on the model you purchased) how to configure the computer using the HW Setup program.

  • Page 27: Key Operation

    Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C.
  • Page 28 Preface xxviii User’s Manual...

  • Page 29: Introduction

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Introduction This chapter provides an equipment checklist, and it identifies the computer's features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA.

  • Page 30: Software

    Software Microsoft The following software is preinstalled: ■ Microsoft ■ Microsoft Internet Explorer ■ TOSHIBA Value Added Package ■ TOSHIBA Hardware Setup ■ TOSHIBA Supervisor Password ■ TOSHIBA Assist ■ TOSHIBA ConfigFree ■ TOSHIBA DVD Player ■ TOSHIBA CD/DVD Acoustic Silencer ■...

  • Page 31: Features

    Features Please visit your region’s web site for the configuration details of the model that you have purchased. Processor Built-in Chipset Memory Main Memory Disclaimer Slots Video RAM User’s Manual Depend on the model you purchased. ® Intel Core™ 2 Duo Processor ®...
  • Page 32 Power Battery Pack RTC Battery AC Adaptor Disks Hard disk Disclaimer 1 Gigabyte (GB) means 10 Hard disk Drive Computers in this series can be configured with a fixed optical media drive. The available optical media drives are described below. Your computer is powered by a rechargeable lithium-ion battery pack.
  • Page 33 Display Controller and Modes section in Appendix B, and Modes for more information. TOSHIBA Vista keyboard, 84 keys or 85 keys, compatible with IBM enhanced keyboard, embedded numeric overlay, dedicated cursor control, keys. Refer to Chapter 5, Keyboard, for details.

  • Page 34: Pointing Device

    Pointing Device Built-In TouchPad Ports External Monitor Universal Serial Bus (USB 2.0) i.LINK (IEEE1394a) Slots Express Card PC Card Multiple Digital Media Card Slot Multimedia Web Camera Sound System A TouchPad and control buttons in the palm rest enable control of the on-screen pointer and scrolling of windows.
  • Page 35 Headphone Jack Microphone Jack Communications Modem Wireless LAN User’s Manual This jack outputs analog audio signals. A 3.5 mm mini microphone jack enables connection of a three-conductor mini jack for monaural microphone input. The internal modem feature is not available on all models.

  • Page 36: Special Features

    Security Password Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot Keys Keypad Overlay Instant Security Display Automatic Power Off HDD Automatic Power Off System Automatic...
  • Page 37 Panel Power On/Off Low Battery Automatic Hibernation TOSHIBA HDD Protection The TOSHIBA HDD Protection function does not guarantee that the hard disk drive will not be damaged. Hibernation Sleep Mode User’s Manual A microprocessor in the computer's intelligent power supply detects the battery’s charge and calculates the remaining battery capacity.

  • Page 38: Toshiba Value Added Package

    *1 Click Power Options. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power Saver TOSHIBA Zooming Utility TOSHIBA PC Diagnostic Tool TOSHIBA Flash Cards TOSHIBA Components Common Driver TOSHIBA Accessibility TOSHIBA Button...

  • Page 39: Utilities And Applications

    HW Setup Power On Password FingerPrint utility User’s Manual TOSHIBA Assist is a graphical user interface that provides easy access to help and services. This program lets you customize your hardware settings according to the way you work with your computer and the peripherals you use.
  • Page 40 TOSHIBA Disc Creator TOSHIBA DVD-RAM Utility TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy 1-12 The DVD Player is used to play DVD Video. It has an on-screen interface and functions. Click , point to All Programs, point to TOSHIBA DVD Player, then click TOSHIBA DVD Player.

  • Page 41: Options

    Two memory modules can be installed in this computer. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time. If you use your computer at more than one site...
  • Page 42 Introduction 1-14 User’s Manual...

  • Page 43: Chapter 2 The Grand Tour

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer's front with its display panel in the closed position.

  • Page 44: Left Side

    Wireless Activity DC IN LED Power LED Battery LED Hard Disk Drive LED Multiple Digital Media Card Slot LED Left side The following figure shows the computer's left side. External Monitor Port Indicates whether the wireless LAN or Bluetooth is active or not. (Depends on the model you purchased.) The DC IN LED indicates the computer is connected to the AC adaptor and it is plugged...
  • Page 45 External Monitor Port Cooling Vents Do not block the cooling vents. Also ensure that foreign objects are kept out of the vents as items such as pins or similar objects, which can damage the computer's circuitry. Universal Serial Bus (USB 2.0) ports Microphone Jack Headphone Jack Volume Dial...

  • Page 46: Right Side

    Right side The following figure shows the computer's right side. PC/Express Card Slot PC/Express Card Slot for Cardbus Card Slot ODD Indicator Emergency Eject Hole Eject Button Universal Serial Bus (USB 2.0) port Eject Button Indicator Emergency USB Port Eject Hole The right side of the computer This slot allows you to insert an Express Card.

  • Page 47: Backside

    LAN Jack Modem Jack Security Lock Backside The following figure shows the computer's back panel. DC IN 19V Jack User’s Manual This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX).

  • Page 48: Underside

    Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery Pack Lock Memory Module Wireless Cover Memory Module and Wireless LAN Cover Battery Pack Lock Battery Pack Battery Release Latch Cooling Vents Hard Disk Cover...

  • Page 49: Front With The Display Open

    Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, lift the front of the display. Position the display at a comfortable viewing angle. Web Camera LED Display Screen...
  • Page 50 Pressing this button will launch an application program that allows for playing of CDs or DVDs. The application that is launched differs by model: Windows Media Player/TOSHIBA DVD Player. (Depends on the model purchased.) Press this button to begin playing an audio CD, a DVD movie or digital audio file.

  • Page 51: Fixed Optical Media Drives

    Fingerprint Sensor TouchPad Control Buttons Fixed optical media drives One of the following optical media drives is installed in the computer, either a CD-ROM drive or DVD-ROM&CD-R/RW drive or a DVD Super Multi drive. An ATAPI interface controller is used for CD/DVD operation. When the computer is accessing a CD/DVD, an indicator on the drive glows.

  • Page 52: Writable Discs

    Writable discs This section describes the types of writable CD discs. Check the specifications of your drive for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, ■ CD-R discs can be written only once. The recorded data cannot be erased or changed.

  • Page 53: Dvd Super Multi Drive (Supporting Dvd±R Double Layer)

    DVD Super Multi drive (Supporting DVD±R Double Layer) The full-size DVD Super Multi drive module lets you record data to writable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the centre of a disc and faster at the outer edge.
  • Page 54 Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. ■ Use only the AC Adaptor supplied with your computer or an equivalent adaptor that is compatible.

  • Page 55: Getting Started

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read the Safety Instruction Manual. This guide, which is included with the computer, explains product liability.

  • Page 56: Installing The Battery Pack

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 57: Connecting The Ac Adaptor

    Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. ■...

  • Page 58: Opening The Display

    2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the back of the computer. 3. Plug the power cord into a live wall outlet. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing.

  • Page 59: Turning On The Power

    Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Press and hold the computer's power button for two or three seconds.

  • Page 60: Turning Off The Power

    Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep Mode. Shut Down mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system’s main screen.
  • Page 61 ■ Before entering Sleep Mode, be sure to save your data. ■ Do not install or remove a memory module while the computer is in Sleep Mode. The computer or the module could be damaged. ■ Do not remove the battery pack while the computer is in Sleep Mode (unless the computer is connected to an AC power source).

  • Page 62: Hibernation Mode

    Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to static electricity or electrical noise. Hibernation Mode The hibernation feature saves the contents of memory to the hard disk when the computer is turned off.

  • Page 63: Restarting The Computer

    Automatic Hibernation Mode The computer will enter Hibernation mode automatically when you press the power button or close the Display Screen. First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2. Open System and Maintenance and open Power Options. 3.

  • Page 64: System Recovery Options

    System Recovery Options About 1.5GB hidden partition is allocated on the hard drive for the System Recovery Options. The System Recovery Options feature will be unusable if this partition is deleted. System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory.

  • Page 65: Restoring The Preinstalled Software From The Recovery Hdd

    5. Double Click the Recovery Disc Creator icon on the Windows Vista desktop, or select the application from Start menu. 6. After TOSHIBA Recovery Disc Creator starts, select the type of media and the title you wish to copy to the media then click the Create button.

  • Page 66: Restoring The Preinstalled Software From Recovery Media

    2. Hold down the F12 key and turn on the power. When In Touch with Tomorrow TOSHIBA appears, release the F12 key. 3. Use the upper or lower cursor key to select the CD/DVD in the display menu.

  • Page 67: Operating Basics

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Operating Basics This chapter gives information on basic operations including using the TouchPad, optical media drives, sound system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer.

  • Page 68: Using The Fingerprint Reader (Depends On Model Purchased)

    Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against the TouchPad. The TouchPad could be damaged. For some functions, you can tap the TouchPad instead of pressing a control button.

  • Page 69: How The Swipe The Finger

    How the Swipe the Finger Using the following steps when swiping fingers for FingerPrint registration or authentication will help to minimize authentication failures: 1. Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you. While lightly touching the sensor, swipe the finger towards you until the sensor surface becomes visible.

  • Page 70: Points To Note About The Fingerprint Sensor

    Points to note about the FingerPrint Sensor Please be aware of the following considerations when using the FingerPrint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, FingerPrint recognition problems or a lower FingerPrint recognition success rate.

  • Page 71: How To Delete The Fingerprint Data

    TOSHIBA does not guarantee that the FingerPrint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of this FingerPrint recognition software or utility.

  • Page 72: Points To Note About The Fingerprint Utility Software

    Points to note about the FingerPrint Utility software You are able to backup saved FingerPrint data and information within the PasswordBank by using the import or Export User Data facility under the FingerPrint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.

  • Page 73: Window Log-On Via Fingerprint Authentication

    3. At the User’s Password screen which is then displayed, you should ensure that the same Windows username is displayed before entering the appropriate password into the Enter password field. Once this has been done, click Next. 4. At the Hints for Fingerprint Enrollment screen, confirm the message displayed and ensure that there is a check mark in the Run interactive tutorial box.

  • Page 74: Fingerprint Power-On Security

    ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the FingerPrint Power-on Security and its extended function to allow FingerPrint to be used to access the computer when it is turned on.

  • Page 75: Fingerprint Single Sign-On Feature

    TOSHIBA does not guarantee that the FingerPrint utility technology will be completely secure or error-free or it will be accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the FingerPrint software.

  • Page 76: Using The Web Camera (Depends On The Model Purchased)

    Using the Web Camera (depends on the model purchased) This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. * Depends on the model purchased Using the software The web camera software is pre-configured to start when you turn on Windows Vista;...

  • Page 77: Using The Microphone

    Capture Still Images Video Recording Audio Recording Function About Player Effects Properties Settings Help Using the microphone Your computer has a built-in microphone that can be used to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions.(Built-in microphone is provided with some models) Since your computer has a built-in microphone and speaker, “feedback”...

  • Page 78: Using The Optical Media Drive

    This feedback occurs repeatedly and causes a very loud, high-pitched noise. It is a common phenomenon that occurs in any sound system when the microphone input is output to the speaker (throughput) and the speaker volume is too loud or too close to the microphone. You can control throughput by adjusting the volume of your speaker or through the Mute function in the Master Volume panel.
  • Page 79 Operating Basics b. Pressing the eject button will not open the drawer when the disc drive's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
  • Page 80 3. Place the disc, label side up, in the drawer. When the drawer is fully opened, the edge of the computer will extend slightly over the disc tray. Therefore, you will need to turn the disc at an angle when you place it in the tray. After seating the disc, however, make sure it lies flat, as shown in the figure above.

  • Page 81: Removing Discs

    Removing discs To remove the disc, follow the steps below and refer to the figure. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical media drive indicator to go out before you open the drawer.

  • Page 82: Writing Cd/Dvds With The Dvd Super Multi Drive Supporting Dvd±R Double Layer

    You can use the DVD Super Multi drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: TOSHIBA Disc Creator and TOSHIBA Direct Disc Writer. Ulead Movie factory for TOSHIBA. Important message (DVD Super Multi drive supporting DVD±R Double layer)

  • Page 83: Before Writing Or Rewriting

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM discs. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 84 Write from the computer's hard disc drive to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator is not recommended. 4-18 ®...

  • Page 85: When Writing Or Rewriting

    Disclaimer (DVD Super Multi drive supporting DVD±R Double layer) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product.

  • Page 86: Toshiba Disc Creator

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the Disc Backup function of TOSHIBA Disc Creator to backup a DVD-R/-RW or DVD+R/+RW disc that wasmade with other software on a different DVD-R/-RW or DVD+R/ +RW recorder.

  • Page 87: When Using Ulead Dvd Moviefactory For Toshiba

    How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD+RW disc in Burner. 3. Click Video Disc dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.

  • Page 88: How To Learn More About Ulead Dvd Moviefactory

    How to learn more about Ulead DVD MovieFactory Please refer to the Help and Manual files for additional Ulead DVD MovieFactory information. Important information for use Note the following limitations when you write Video DVD: 1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory.

  • Page 89: Media Care

    • Install, remove or connect external devices, including the following: PC card, SD card, USB device, external display, i.LINK. devices, optical digital devices. ■ Please verify your disc after recording important data. ■ DVD-R/+R/+RW disc cannot be written in VR format. ■...

  • Page 90: Sound System

    Sound System This section describes audio controls including sound levels and power management. Volume Mixer The Volume Mixer utility lets you control the audio volume for playback of devices and applications under Windows. ■ To launch the Volume Mixer utility, right click on the speaker icon the taskbar, and select Open Volume Mixer from the sub menu.

  • Page 91: Region Selection

    To select a region, follow the steps below. 1. Click start, point to All Programs, TOSHIBA, Networking, and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 92: Modem Selection

    Open dialog box, if the modem and Telephony Current Location region code do not match. A warning dialog box is displayed if current settings for region code and telephony location are incorrect. Modem Selection If the computer cannot recognize the internal modem, a dialog box is displayed.

  • Page 93: Disconnecting

    Do not pull on the cable or move the computer while the cable is connected. If you use a storage device such as an optical drive or hard disk drive connected to a 16-bit PC Card, you might experience the following modem problems: ■...

  • Page 94: Wireless Lan

    TOSHIBA strongly recommend the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. ® Bluetooth...

  • Page 95: Wireless Communication Switch

    The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable the Wireless LAN function, with the on/off switch.

  • Page 96: Lan

    The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation.

  • Page 97: Disconnecting Lan Cable

    ■ Before moving the computer, it recommends changing the function of TOSHIBA HDD Protection. Refer to the section, Drive (HDD) ■ Make sure all disk activity has ended before moving the computer.

  • Page 98: Using The Hard Disk Drive (Hdd) Protection

    This computer has a function for reducing the risk of damage on the hard disk drive. Using an acceleration sensor built into the computer, TOSHIBA HDD Protection detects vibration shocks and similar signs of movement of the computer, and automatically moves the Hard Disk Drive head to a safe position to reduce the risk of damage that could be caused by head-to-disk contact.

  • Page 99: Toshiba Hdd Protection Properties

    TOSHIBA HDD Protection Properties You can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection Properties window. To open the window, click Start All Programs Setting. The window can also be started from the icon on the Taskbar or from the Control Panel.

  • Page 100: Details

    Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.

  • Page 101: The Keyboard

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer.

  • Page 102: F1 ... F12 Function Keys

    F1 ... F12 function keys The function keys (not to be confused with Fn) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed.

  • Page 103: Hot Keys

    Press Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys. Refer to the how to operate these keys. The power on default for both settings is off. Press Fn + F12 to lock the cursor on a specific line.
  • Page 104 Number Lock: Enables or disables the Number Lock function. Scroll Lock: Enables or disables the Scroll Lock function. Zoom: Changes the display resolution. TOSHIBA Zooming Utility (reduce): Reduces the icon size on the desktop or the font size within one of the supported application windows. User’s Manual...

  • Page 105: Fn Sticky Key (Depends On The Model You Purchased)

    Adobe Reader and the icons on the desktop. Fn Sticky key (Depends on the model you purchased) You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an "F number" key.

  • Page 106: Keypad Overlay

    Keypad overlay Your computer's keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the centre of the keyboard with gray letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 101/102-key enhanced keyboard described previously.

  • Page 107: Temporarily Using Normal Keyboard (Overlay On)

    Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2.
  • Page 108 The Keyboard User’s Manual...

  • Page 109: Power And Power-Up Modes

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Power and Power-Up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.

  • Page 110: Power Indicators

    Power indicators As shown in the above table, the Battery. Power indicators on the system indicator alert you to the computer’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of the battery pack. The following indicator lights indicate the battery status: Flashing orange Orange...

  • Page 111: Battery Types

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Sleep Mode.

  • Page 112: Real Time Clock Battery

    The computer's RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 113: Care And Use Of The Battery Pack

    Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance.
  • Page 114 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 115: Charging The Batteries

    6. Be sure to monitor the remaining battery power. If the battery pack and real time clock battery discharge completely, Sleep Mode will not function and data in memory will be lost. Also, the computer might register an incorrect time and date. In this case, connect the AC adaptor to recharge the batteries.

  • Page 116: Battery Charging Notice

    Time The following table shows the approximate time required to fully charge a discharged battery. Battery type Battery pack (3cell, 6cell, 9cell) RTC battery The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.

  • Page 117: Monitoring Battery Capacity

    Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Windows Mobility Center window ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.

  • Page 118: Retaining Data With Power Off

    Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Battery pack (3cell, 6cell, 9cell) RTC battery Extending battery life To maximize the life of your battery pack: ■...

  • Page 119: Replacing The Battery Pack

    Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced.

  • Page 120: Installing The Battery Pack

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 121: Power-Up Modes

    or if available Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power on Security. If you would not like to swipe your finger or cannot authenticate the fingerprint for some reasons, push the BkSp key to skip the fingerprint authentication screen.
  • Page 122 Power and Power-Up Modes 6-14 User’s Manual...

  • Page 123: Hw Setup (Depends On The Model You Purchased)

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series HW Setup (Depends on the model you purchased) This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for General, Password, Display, Boot Priority, Keyboard, LAN, and USB.

  • Page 124: User Password

    Password This tab allows you to set or reset the user password for power on. User Password Lets you register a new password or un-register an existing password. Not Registered Registered Owner String This blank field is used to display a message when the password field is displayed on startup.
  • Page 125 Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep Mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep Mode. Enabled Disabled USB Keyboard/Mouse/FDD Legacy Emulation...
  • Page 126 HW Setup (Depends on the model you purchased) User’s Manual...

  • Page 127: Chapter 8 Optional Devices

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■...

  • Page 128: Pc Card And Express Card

    The computer is equipped with a PC Card expansion slot that can accommodate one Type II card or one Express Card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC Cards, including PC Card 16’s multifunction card and CardBus PC Cards.

  • Page 129: Removing A Pc Card Or Express Card

    After inserting the card, refer to the card’s documentation and check the configuration in Windows Removing a PC Card or Express Card ■ Before removing a Card, make sure that any applications or system services do not use the card. ■...

  • Page 130: Sd/Sdhc/Mmc/Ms/Ms Pro/Xd Memory Cards

    SD/SDHC/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type SDHC MS Pro...

  • Page 131: Installing A Memory Card

    Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Be sure the memory card is oriented properly before you insert it. ® If Windows ■ The multiple digital media card slot only accepts one type of card at a time.

  • Page 132: Memory Card Care

    ■ Make sure the memory card indicator is out before you remove the card or turn off the computer's power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card.

  • Page 133: Memory Expansion

    RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost.
  • Page 134 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

  • Page 135: Removing A Memory Module

    8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chapter 6, Modes. 10. Turn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General tab. Points to note about memory module error If you install a memory module that is not compatible with the computer, the Power indicator will flash (on for 0.5 seconds, off for 0.5 seconds) in the...

  • Page 136: Additional Battery Pack

    6. Seat the cover and secure it with screws and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.

  • Page 137: External Monitor

    External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports several video modes. Refer to Appendix B, steps below. 1. Turn the computer off. 2. Connect the monitor to the external monitor port. 3.
  • Page 138 Optional Devices 8-12 User’s Manual...

  • Page 139: Troubleshooting

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 140: Preliminary Checklist

    Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 141: Hardware And System Checklist

    Software Hardware Hardware and system checklist This section discusses problems caused by your computer's hardware or attached peripherals. Basic problems may occur in the following areas: ■ System start-up ■ Self test ■ Power ■ Real Time Clock ■ Keyboard ■...

  • Page 142: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 143: Ac Power

    AC power If you have trouble turning on the computer with the AC adaptor connected, check the Battery indicator. Refer to Chapter 6, Modes for more information. Problem AC adaptor doesn’t power the computer Battery If you suspect a problem with the battery, check the Battery indicator. For information on indicator and battery operation refer to Chapter 6, and Power-Up Problem...

  • Page 144: Disposing Of Pc And Pc Batteries

    Problem Battery doesn’t power the computer as long as expected Disposing of PC and PC batteries ■ Discard this PC in accordance with applicable laws and regulations. For further information, contact your local government. ■ This PC contains rechargeable batteries. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them.

  • Page 145: Real Time Clock

    ■ Reformatting the media ■ Reinstalling an operating system from the recovery CD-ROM The procedures above delete only the initial part of the data used for file management. This makes the file invisible to the operating system, but the data can still be read by specialized utilities. If you dispose of the PC, please delete all the data on its hard disk drive.

  • Page 146: Lcd Panel

    LCD panel Apparent LCD problems may be related to the computer's setup. Problem No display Problems above remain unresolved or other problems occur Hard disk drive Problem Computer does not boot from hard disk drive Slow performance Procedure Press hot keys Fn + F5 to change the display priority, to make sure it is not set for an external monitor.

  • Page 147: Recovery Discs

    Media" section in this manual. You will be directed to select "Restore Original Factory Image" from the drop-down menu. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. Operating Procedure Make sure the drive's drawer is securely closed.

  • Page 148: Pointing Device

    Problem Some CD/DVDs run correctly, but others do Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. TouchPad Problem On-screen pointer does not respond to Pad operation Double-tapping does not work...

  • Page 149: Usb Mouse

    Problem The mouse pointer moves too fast or too slow The response of the TouchPad is too sensitive USB mouse Problem On-screen pointer does not respond to mouse operation Double-clicking does not work User’s Manual Procedure Try changing the speed setting in the mouse control utility.

  • Page 150: Usb

    Problem The mouse pointer moves too fast or too slow The mouse pointer moves erratically Also refer to your USB device’s documentation. Problem USB device does not work Memory expansion Refer also to Chapter 8, memory modules. Problem The computer hangs up Make sure the memory module installed in the 9-12 Procedure Try changing the speed setting in the mouse...

  • Page 151: Sound System

    Sound system Refer also to documentation for your audio devices. Problem No sound is heard Monitor Refer also to Chapter 8, documentation. Problem Monitor does not turn No display Display error occurs Modem Problem Communication software can’t initialize modem You can hear a dial tone but can’t make a call You place a call, but a connection can’t be...

  • Page 152: Lan

    Problem After making a call you can’t hear a ring Communication is cut off unexpectedly A CONNECT display is quickly replaced by NO CARRIER Character display becomes garbled during a communication You cannot receive an incoming call Problem Cannot access LAN Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator.

  • Page 153: Fingerprint Sensor

    User Password if it was not registered. 1. Make sure you have enroll finger in windows account. 2. Set the User Password by using TOSHIBA Password Utility and restart the system. 3. Make sure place a checkmark in Replace the...

  • Page 154: Toshiba Support

    They are your best sources for current information and support. Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below. Outside of Europe Australia TOSHIBA Australia Pty.
  • Page 155 Outside of Europe Singapore TOSHIBA Singapore Pte. Ltd. 438B Alexandra Road #06-01 Alexandra Technopark Singapore 119968 United States of America TOSHIBA America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 User’s Manual In Europe Spain TOSHIBA Information Systems, ESPAÑA...
  • Page 156 Troubleshooting 9-18 User’s Manual...

  • Page 157: Physical Dimensions

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Specifications This appendix summarizes the computer's technical specifications. Physical Dimensions Weight Size Environmental Requirements Ambient temperature 5°C to 35°C Thermal gradient Relative humidity Altitude (from sea...
  • Page 158 Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialling Control command Monitor function Communication specifications Communication System Communication protocol Communication Speed Telephone line (analog only) Pulse Tone AT commands EIA-578 commands Computer's speaker Data: Full duplex Fax: Half duplex...
  • Page 159 Transmitting level Receiving level Input/output impedance Error correcting Data compression Power supply User’s Manual -10 dBm -10 to -40 dBm 600 ohms ±30% MNP class 4 and ITU-T V.42 MNP class 5 and ITU-T V.42bis +3.3V (supplied by computer)
  • Page 160 Specifications User’s Manual...

  • Page 161: Display Controller And Modes

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular picture elements (pels) on or off. The controller is an advanced Video Graphics Array (VGA) that provides Graphics Array (XGA) support for the internal LCD and external monitors.

  • Page 162: Video Modes

    Video modes The computer supports video modes defined in the tables below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates. Also, if your software supports both graphics and text modes, the screen display may appear to operate faster using a text mode.
  • Page 163 Table 1: Video modes (VGA) (continued) Video Type Resolution mode 320 x 200 Grph Pels 640 x 200 Grph Pels 640 × 350 Grph Pels 640 × 350 Grph Pels 640 × 480 Grph Pels 640 × 480 Grph Pels 320 x 200 Grph Pels...
  • Page 164 Table 2: Video modes Resolution 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1600 x 1200 1920 x 1440 2048 x 1536 Some modes are not supported at LCD+CRT simultaneous mode and LCD+CRT Multi Monitor mode. Some models only support a maximum resolution of 1024 x 768.
  • Page 165 Table 2: Video modes (continued) Resolution 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1600 x 1200 1920 x 1440 2048 x 1536 Some modes are not supported at LCD+CRT simultaneous mode and LCD+CRT Multi Monitor mode. Some models only support a maximum resolution of 1024 x 768.

  • Page 166: Display Settings

    Display Settings 1. You cannot move from the Settings tab of Display Properties to the multi-monitor when you are using the display of the computer and an external CRT display at the same time. ■ The Settings tab is displayed in the following steps; ■...
  • Page 167 ■ The way to move to multi-monitor Intel ■ Switch to Display Settings, like shown in previous page. ■ Click Advanced Settings in Display Settings. ■ Click Graphics Properties in Intel Driver for Mobile tab. ■ Select Displays Devices tab in (Multiple Monitors) and Intel Express Properties.
  • Page 168 Display Controller and Modes User’s Manual...

  • Page 169: Card Specifications

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Wireless LAN Card Specifications Form Factor Compatibility Network Operating System Media Access Protocol Data Rate The Wireless LAN feature is not available on all models. User’s Manual...

  • Page 170: Radio Characteristics

    Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
  • Page 171 Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 172 When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

  • Page 173: Ac Power Cord And Connectors

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used.
  • Page 174 In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A.

  • Page 175: Legal Footnotes

    TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers.
  • Page 176 86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your computer documentation or visit the TOSHIBA website at www.pcsupport.toshiba.com for details). CPU performance may also vary from specifications due to design configuration.

  • Page 177: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 178: Copy Protection

    Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. [54Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g) standard.] The actual transmission speed will be lower than the theoretical maximum speed.
  • Page 179 TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port...
  • Page 180 LED: light emitting diode LSI: large scale integration MS-DOS: Microsoft OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output SXGA+: super extended graphics array plus...
  • Page 181 application: A group of programs that together are used for a specific task such as accounting, financial planning, spread sheets, word processing and games. ASCII: American Standard Code for Information Interchange. ASCII code is a set of 256 binary codes that represent the most commonly used letters, numbers, and symbols.
  • Page 182 cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 183 computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information. configuration: The specific components in your system (such as the terminal, printer, and disk drives) and the settings that define how your system works.
  • Page 184 A collection of related information; a file can contain data, programs, or both. firmware: A set of instructions built into the hardware which controls and directs a microprocessor’s activities. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. Glossary-6 User’s Manual...
  • Page 185 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 186 interface: 1) Hardware and/or software components of a system used specifically to connect one system or device to another. 2) To physically connect one system or device to another to exchange information. 3) The point of contact between user, the computer, and the program, for example, the keyboard or a menu.
  • Page 187 main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. menu: A software interface that displays a list of options on the screen. Also called a screen.
  • Page 188 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
  • Page 189 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad: A pointing device integrated into the TOSHIBA computer palm rest. User’s Manual...
  • Page 190 TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer. VGA: Video Graphics Array is an industry standard video adaptor that lets you run any popular software.
  • Page 191 TOSHIBA Satellite U300 / Satellite Pro U300 / PORTEGE M600 / TECRA M8 Series Index AC adaptor, 1-4 additional, 1-13 connecting, 3-3 ASCII characters, 5-7 Battery charging, 6-7 extending battery life, 6-10 indicator, 6-1 location, 2-6 Monitoring capacity, 6-9 real time clock, 1-4, 6-4...
  • Page 192 Memory expansion, 9-12 Modem, 9-13 Monitor, 9-13 overheating power down, PC card, 9-15 Pointing device, 9-10 Power, 9-4 Real Time Clock, 9-7 Self test, 9-4 Sound system, 9-13 Support from TOSHIBA, 9-16 System start-up, 9-3 USB, 9-12 Wireless LAN, 9-14 User’s Manual...
  • Page 193 ScrLock, 5-3 Sound System, 1-6, 4-24 headphone jack, 1-6 microphone jack, 1-6 mute hot keys, 5-3 TOSHIBA ConfigFree, 1-12 TOSHIBA Disc Creator, 1-11 Touch Pad, 1-6 location, 2-7 using, 4-1 USB, 1-6 Video modes, B-2 Video RAM, 1-3...
  • Page 194 Index Index-4 User’s Manual...

This manual is also suitable for:

Satellite u305-s5097Satellite u305-s2812Satellite u305-s5127Satellite u305-s7448Satellite u305-s7449Satellite u305-s7467 ... Show all

Table of Contents