4 Replacement Procedures
4.12 Wireless Communication Switch Board
Removing the Wireless Communication Switch Board
To remove the Wireless communication switch board, follow the steps below and refer to figure
4-27.
1. Disconnect the cable from PJ3270 on the system board.
2. Remove one M2 4 screw securing the Wireless communication switch board.
3. Lift out the Wireless communication switch board.
4. Disconnect the cable from PJ3290 on the Wireless communication switch board.
Figure 4-27 Removing the Wireless Communication Switch Board
4-50
4.12 Bluetooth Switch Board
PORTEGE M100 Maintenance Manual (960-452)