Toshiba Portege M100 Maintenance Manual page 196

3.28 Bluetooth Test Program
3.28.2 Ich_bt 53
Follow the steps below to perform the test program, Ich_bt 53. This Program checks the function.
Refer to Section 2.13, Bluetooth Troubleshooting, for a detailed description of the troubleshooting
procedures for the Bluetooth.
1. Preparing the target machine for Ich_bt 53.
(b) Insert a floppy disk containing the test program into the target machine and turn the
target machine.
(c) Prompts are displayed as shown in figure 3-4, if it is the first time the program has
run.
The Program Ich_bt 53 runs.
(d) When the machine is initializing, the following message is shown.
----------------------------------------------------------------------------
-
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
Co.
----------------------------------------------------------------------------
-
+----------------------+
| DUT
+----------------------+
Initializing ...
PORTEGE M100 Maintenance Manual (960-452)
|
Figure 3-4 Initializing for Ich_bt 53
3 Tests and Diagnostics
Copyright (C) by TOSHIBA
3-87