4 Replacement Procedures
4.19 FL Inverter Board
Removing the FL inverter board
To remove the FL inverter board, follow the steps below and refer to figure 4-44.
1. Remove one M2x4 flat-head screw securing the FL inverter board.
2. Peel off insulators on both the sides of FL inverter board.
3. Disconnect the FL cable from CN1 on the FL inverter board.
4. Disconnect the HV cable from CN2 on the FL inverter board.
5. Remove the FL inverter board.
4-68
Figure 4-44 Removing two screws
PORTEGE M100 Maintenance Manual (960-452)
4.21 FL Inverter Board