Tft Fl (Model 12.1 Toshiba); Removing The Tft Fl (Model 12.1 Toshiba) - Toshiba Portege M100 Maintenance Manual

4 Replacement Procedures

4.23 TFT FL (Model 12.1 Toshiba)

Removing the TFT FL (Model 12.1 Toshiba)

To remove the TFT FL (Model 12.1 Toshiba), follow the steps below and refer to Figures
4-55 to 4-58.
1. Carefully, turn the LCD module upside down on the flat surface of the table. To avoid
damaging the surface of the LCD module, lay it on a protective, dust-free sheet such as a
soft, clean cloth.
2. Remove the light-green tape securing the wire.
3. Remove the FPC protective sheet, the blue tape and the PCB sheet. Keep the PCB sheet
for reuse.
4. Remove four screws.
CAUTION: Do not damage the FPC.
4-82
Figure 4-55 Removing the tapes and sheet
PORTEGE M100 Maintenance Manual (960-452)
4.23 TFT FL