Toshiba Portege M100 Maintenance Manual page 174

3.23 SETUP
Alarm Date Option
The Alarm Date Option sets a month and date to power on automatically. When
Alarm Time is set to "Disabled", The alarm date is not set.
Disabled
Wake-up on LAN
Calling from the administrator of LAN automatically turns on the computer. When
the Built-in LAN is "Enabled", this option can be set. An AC adapter is required for
this option.
Enabled
Disabled
(f) Panel Power On/Off
This option is displayed only in the resume mode.
Enabled
Disabled
9. Configuration
This field displays the configuration method.
The devices are initialized when the PNP OS loads.
Setup by OS
All Devices
NOTE: When the installed OS is used, selecting "Set by OS" is recommended. But, when
setting "PC CARD-Controller Mode" to other than " Auto-Selected", select " All
Devices".
PORTEGE M100 Maintenance Manual (960-452)
Does not set the alarm date.
Uses Wake-up on LAN function.
Does not use Wake-up on LAN function. (Default)
Enables the Panel Power On/Off.
Disables the Panel Power On/Off. (Default)
Initializes devices, which is needed to load an operating
system. Operating system initializes other devices. When
this option is selected, the setting in the "PC Card"
becomes "Auto-Selected" and it can not be changed.
(Default)
All devices will be initialized.
3 Tests and Diagnostics
3-65