4.16 PC Card Slot
Installing the PC card slot
To install the PC card slot, follow the steps below and refer to figures 4-38 and 4-39.
1. Fit the PC card slot into the connector PJ2110 on the system board.
CAUTION: If you do not seat the PC card slot completely, you might not be able to
connect the system board properly. Make sure the plastic part of the PC
card spot is flush with the connector.
2. Secure four M2 12 screws .
PORTEGE M100 Maintenance Manual (960-452)
4 Replacement Procedures
4-61