Accessing The Setup Program - Toshiba Portege M100 Maintenance Manual

3.23 SETUP

3.23.2 Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the SETUP screen.
The SETUP screen is divided into two pages.
MEMORY
Total
SYSTEM DATE/TIME
Date(MM-DD-YY)
Time(HH:MM:SS)
BATTERY
Battery Save Mode = Full Power
PASSWORD
Not Registered
HDD Password
HDD
HDD Password Mode
User password
Master password
: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving
Exit
CONFIGURATION
Device Config.
I/O PORTS
Serial = COM1(3F8H/IRQ4)
Parallel = LPT1(378H/IRQ7/CH3)
DRIVERS I/O
Built-in HDD
= Primary IDE(1F0H/IRQ14)
Select Bay
= Secondary IDE(170H/IRQ15)
PCI BUS
PCI BUS
: Select items Space, BkSp: Change values PgDn, PgUp: Change pages
Esc: Exit without saving
Exit
NOTE: Panel Power On/Off item appears only when the Power-up Mode is in Resume
mode.
PORTEGE M100 Maintenance Manual (960-452)
SYSTEM SETUP (1/2)
= XXXXX KB
= XX-XX-XXXX
= XX:XX:XX
= Built-in HDD
= User Only
= Not Registered
= Not Registered
Home : Set default values
SYSTEM SETUP (2/2)
= Setup by OS
= IRQ10, IRQ11
Home : Set default values
ACPI BIOS version = X.XX
BOOT PRIORITY
Boot Priority = HDD FDD CD-ROM LAN
HDD Priority
= Built -in HDD Second HDD
Network Boot Protocol = PXE
DISPLAY
Power On Display
Selected
Others
Power-up mode
CPU Cache
Level 2 Cache
Dynamic CPU Frequency Mode
= Dynamically Switchable
Auto Power On
Panel Power On/Off
End: Save changes and
ACPI BIOS version = X.XX
PC CARD
Controller Mode = Auto-Selected
PERIPHERAL
Pointing Device
Ext Keyboard "Fn"
Parallel P ort Mode
Hard Disk Mode
LEGACY EMULATION
USB KB/Mouse Legacy Emulation
USB-FDD Legacy Emulation
PCI LAN
Built -in LAN = Enabled
End: Save changes and
3 Tests and Diagnostics
PC Card
= Auto-
= Boot
= Enabled
= Enabled
= Disabled
= Disabled
= Enabled
= Disabled
= ECP
= Enhanced IDE(Normal)
= Enabled
=
3-53