Toshiba Portege M100 Maintenance Manual page 267

4 Replacement Procedures
6. Route the Right speaker cable and connect it to the connector PJ9512.
CAUTION: Be careful to route the cable so that the Top cover will not pinch it. Make
sure it lies to the left of the IC 312. Refer to Figure 4-32.
7. Press along the edges of the top cover with display assembly to secure latches.
8. Connect the LCD/LED cable to PJ5600.
9. Secure eight M2 4 flat-head screws .
10. Close the top cover with display assembly and turn the computer upside down.
11. Secure the following four screws:
Two M2 6 silver screws
Two M2 10 silver flat-head screws
4-56
Figure 4-32 Route the Right Speaker cable
4.13 Top cover with Display Assembly
PORTEGE M100 Maintenance Manual (960-452)