Toshiba Portege M100 Maintenance Manual page 185

3 Tests and Diagnostics
Setting the tester machine
NOTE: Release the write-protection of the floppy disk for the test.
Insert a floppy disk containing the test program into the FDD of the tester machine and turn on the
tester machine. The Wireless LAN test menu will appear.
###############################################################
####
###############################################################
*
*
*
*
*
***************************************************************
....Press test number [1,0] ?
Press 1 and Enter in the tester machine. After a while, the following message will appear:
--------------------------------------------
-
-
-
-
-
--------------------------------------------
To proceed the test, press any key.
When the tester machine has passed the test, "OK" message will appear in the tester machine.
Press Enter to return to the main menu.
When the tester machine has not passed the test, "NG" message will appear in the tester machine.
Pressing Enter on the screen shows the following message.
*************************************************************
*
* 8.02 11a Tx Test AUX Antenna NG
*
*************************************************************
3-76
Atheros WLAN sub system repair test
1 .....Test PC [Initiator]
0 .....[Responder]
mac address check OK !!
...Press any key !!
3.25 Wireless LAN Test Program (Atheros)
VX.XX
-
-
-
-
-
*
*
*
PORTEGE M100 Maintenance Manual (960-452)
####
*
*
*
*
*