Wireless Lan Test Program (Cisco) - Toshiba Portege M100 Maintenance Manual

3.24 Wireless LAN Test Program (Cisco)

3.24 Wireless LAN Test Program (Cisco)
This section describes how to perform the wireless LAN transmitting-receiving test with the test
program (Cisco)
NOTE: Use another computer that can communicate by the wireless LAN as a
reference machine to perform this test. AP is also necessary.
Follow the steps below to perform the test program (Cisco). Refer to Section 2.14, Wireless LAN
Troubleshooting, for a detailed description of the troubleshooting procedures for the wireless LAN.
1. Preparing the target machine for Ping Pong Responder
(a) Insert a floppy disk containing the test program into the target machine and turn on the
target machine.
NOTE: Release the write-protection of the floppy disk for the test.
(b) Prompts are displayed as shown in below:
PORTEGE M100 Maintenance Manual (960-452)
3 Tests and Diagnostics
3-71