4 Replacement Procedures
4.11 Modem Daughter Card (MDC)
Removing the Modem Daughter Card
To remove the modem daughter card, follow the steps below and refer to figure 4-26.
1. Remove two M2 4 screws securing the modem daughter card.
2. Carefully lift up just above the modem daughter card to disconnect it from PJ3020 on the
system board.
3. Disconnect the MDC cable from the modem daughter card.
4-48
Figure 4-26 Removing the modem daughter card
4.11 Modem Daughter Card
PORTEGE M100 Maintenance Manual (960-452)