System Test - Toshiba Portege M100 Maintenance Manual

3.4 System Test

Subtest 10 Temperature surveillance test
Settings at the start of test
BIOS test mode (FAN -forced high speed, prohibition of SM interruption etc.)
Prohibition of TCC throttling (Tj = 100C)
Turns off the LCD panel and FL inverter.
Set the charge prohibition mode
Details of during the test
For the first One minute, CPU throttling is maximum. (87.5% throttle)
For fourteen minutes after that, CPU throttling is prohibited. (0% throttle)
Method and time of Test
Total for 15 minutes
The test result (OK or NG) is judged from the gap between the temperature of the
outside and temperature of the inside. The parameter of the temperature is
different in each system, so use data informed by the system department.
Subtest 11 BT/W-LAN Switch test
This subtest checks Bluetooth switch On/Off. The following messages appear.
Blue-tooth Switch "ON", and press [Enter] key
Blue-tooth Switch "OFF", and press [Enter] key
Subtest 12 Battery F/W test
This subtest reads F/W data from the battery and compares it with correct constant
data. The following message appears.
* Get! Battery Data *
Battery Type = XXXXXXXXXXXX
Subtest 13 Option Battery F/W test
This subtest reads F/W data from the option battery and compares it with correct
constant data. The following message appears.
* Get! Battery Data *
Battery Type = XXXXXXXXXXXX
PORTEGE M100 Maintenance Manual (960-452)
3 Tests and Diagnostics
3-11