I/O Board; Removing The I/O Board - Toshiba Portege M100 Maintenance Manual

Personal computer

Hide thumbs Also See for Portege M100:

Table of Contents

4 Replacement Procedures

4.17 I/O Board

To remove the I/O Board, follow the steps below and refer to figures 4-40 and 4-41.

1. Remove five M2 4 screws securing the I/O Board.

2. Lift out the I/O Board.

CAUTION: When removing the IO board, be sure to lift up it perpendicularly and gently.

Do not to give excessive stress to the stacking connectors. Otherwise the

soldered portions of connectors may be damaged.

Figure 4-40 Removing six screws securing the I/O Board

PORTEGE M100 Maintenance Manual (960-452)

4.17 I/O Board

Table of Contents