Installing The Modem Daughter Card - Toshiba Portege M100 Maintenance Manual

Personal computer

Hide thumbs Also See for Portege M100:

Table of Contents

4.11 Modem Daughter Card

Installing the Modem Daughter Card

To install the modem relay board, follow the steps below and refer to figures 4-26.

1. Connect the MDC cable to the modem daughter card

2. Seat the modem daughter card and press carefully on the end of the card to connect it to

PJ3020 on the system board. Be careful not to damage the card or connector.

3. Secure the modem daughter card with two M2 4 screws .

PORTEGE M100 Maintenance Manual (960-452)

4 Replacement Procedures

Table of Contents