Toshiba Portege M100 Maintenance Manual page 177

3 Tests and Diagnostics
11. Drives I/O
This option displays the address and interrupt level for hard disk drive and CD/DVD-ROM
drive. It is for information only and cannot be changed.
Built-in HDD
Select Bay
12. PCI Bus
This item displays the interrupt level for the Card Bus in the computer and the PCI bus in
the Desk Station. It is for information only and cannot be changed.
PCI Bus
13. PC Card
This option lets you set the PC Card Controller mode.
When the "All Device" is selected in the "Device Config." of the "9.Configuration", this
option can be changed.
Auto-Selected
Card Bus/16 bit
PCIC Compatible If the card does not work properly with the Auto-Selected and
14. Peripheral
Use this option to select the peripheral's mode.
(a) Pointing Devices
This option enables or disables the Pointing Device.
Enabled
Disabled
3-68
This cannot be changed.
This cannot be changed.
This cannot be changed.
If you are using an operating system which support
Plug&Play, use this setting for all PC card. (Default)
If the card does not work properly with the Auto-Selected
setting, use this setting.
CardBus/16 bit setting, use this setting.
Enables the Pointing Device. (Default)
Disables the Pointing Device.
PORTEGE M100 Maintenance Manual (960-452)
3.23 SETUP