Toshiba Portege M100 Maintenance Manual page 117

3 Tests and Diagnostics
Subtest 08 DMI write
The following messages appear in order. Input each information. (If you do not
replace the PCB, the DMI information should not be changed.)
1. "Enter Model Name ?" is displayed.
Input the computer's model name and press Enter. (e.g. DynaBook)
2. "Enter Version Number ?" is displayed.
Input the computer's version number and press Enter. (e.g. PC18070C313S)
3. "Enter Serial Number ?" is displayed.
Input the computer's serial number and press Enter. (e.g. 12345678)
4. "Enter Model Number ?" is displayed.
Input the computer's sales model number and press Enter. (e.g. PP200-
AAAAA)
5. "Enter Bundle Number ?" is displayed.
Input the computer's PCN/Bundle number and press Enter. (e.g.
PMSREQ3Q34H/S0123456789)
6. "Write data OK (Y/N) ?" is displayed.
To write the DMI information to the Flash ROM, press Y, and then Enter.
7. "Create DMIINFO TXT (Y/N) ?" is displayed.
Press Y, then the DMI information (text data) is written to the Floppy disk, etc.
3-10 PORTEGE M100 Maintenance Manual (960-452)
3.4 System Test