System Test - Toshiba Portege M100 Maintenance Manual

3.4 System Test

3.4 System Test
To execute the System Test select 1 from the DIAGNOSTIC TEST MENU, press Enter and
follow the directions on the screen. Move the highlight bar to the subtest you want to execute and
press Enter.
Subtest 01 ROM Checksum
This subtest executes a checksum test of the BIOS ROM (range: F0000h to
FFFFFh, 64KB) on the System Board.
Subtest 04 Fan On/Off
This subtest checks fan operation using the on/off command.
The following message will appear. Make sure the rotation of the fan stops and
press Enter.
*** Fan ON *** : Press [Enter] key?
The following message will appear. Make sure the rotation of the fan starts and
press Enter.
*** Fan OFF *** : Press [Enter] key?
When you press Enter, the fan should stop.
Subtest 06 Quick Charge
This subtest checks the status for the quick charge.
Subtest 07 DMI read
This subtest displays the information in the Flash-ROM in the following format.
Model Name
Version Number
Serial Number
Model Number
PCN/BND Number
UUID Number
Press [Enter] to EXIT
To exit this subtest and return to the SYSTEM test menu, press Enter.
PORTEGE M100 Maintenance Manual (960-452)
: XXXXXXXXXXX
: XXXXXXXXXXXX
: XXXXXXXX
: XXXXXX-XXXXX
: XXXXXXXXXXXX/XXXXXXXXXXX
: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
3 Tests and Diagnostics
3-9