4.6 Keyboard
Installing the Keyboard
To install the keyboard, follow the steps below and refer to figures 4-15 to 4-17.
1. Put the keyboard with the backside up on the palm rest.
2. Connect the keyboard cable to PJ3230 on the system board.
3. Seat the keyboard in position and secure it with two M2 4 black screws and the
harness plate with one M2 4 flat-head screw.
4. Seat the keyboard holder and press to secure latches.
PORTEGE M100 Maintenance Manual (960-452)
4 Replacement Procedures
4-35