Modem Daughter Card (Mdc) - Toshiba PORTEGE S100 Maintenance Manual

4 Replacement Procedures
4.6

Modem Daughter Card (MDC)

Removing the Modem Daughter Card
To remove the modem daughter card, follow the steps below and refer to Figure 4-5.
1. Remove the following screws securing the modem daughter card.
• M2×4B
2. Lift up the modem daughter card to disconnect it from the connector CN3000 on
the system board.
3. Disconnect the modem cable from the connector on the modem daughter card.
Modem daughter card
CN3000
Figure 4-5 Removing the Modem Daughter Card (MDC)
4-14
×2
BIND screw
4.6 Modem Daughter Card (MDC)
M2×4B BIND
Modem cable
PORTEGE S100 Maintenance Manual (960-508)