Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 57
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
9.
Select Queues Serviced by Printer from the Print Server
Configuration menu and press Enter.
10. Select the Printer that you want to use from the Defined Printers
list and press Enter.
11. Press the Insert key and assign a queue to the print server port
from the Available Queues list.
12. Specify the priority from 1 to 10. One is the highest priority.
13. Press Esc to exit PCONSOLE.
Configuring the Ethernet card in Remote Printer mode
1.
Run a print server.
To use a file server as a print server, at the > prompt type:
>LOAD PSERVER print server name
To set up a dedicated print server, at the > prompt type:
> PSERVER print server name
2.
Run EPSON Net!2 from the Start menu.
Using the Ethernet Card with NetWare 4-13
Advertisement
Table of Contents
