Setting Up For Sunsoft Solaris 2.4 Or Later - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Setting up for SunSoft Solaris 2.4 or later
In the following steps, substitute the name you will use to configure
your printer's Ethernet card on the network for HOSTNAME.
Substitute the printer name that users will send print jobs to for
Rprinter.
1.
Add the IP address and printer host name to the \etc\hosts file.
For example:
22.33.44.55 HOSTNAME
2.
Define the host name as a print server.
For example:
lpsystem -t bsd HOSTNAME
3.
Create the printer.
For example:
lpadmin -p Rprinter -s HOSTNAME\aux-T unknown-1
any
4.
Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
Files are printed using the lp command.
For example:
lp -d Rprinter Print-File-Name
9-2 Using the Ethernet Card with UNIX
Advertisement
Table of Contents
Need help?
Do you have a question about the C823642 - Enet Print Server Type B Multi Protocol 10/100BTX and is the answer not in the manual?