6.
Select Monitor to monitor network printers that do not have
drivers installed in your computer. Select Do not monitor only
if network traffic is a problem. Click Next.
Note (NetWare network-based printers):
In the screen shown below, set the number of hops (0 to 15) and click
Next. This option is available only if IPX/SPX is installed in your
computer and you selected Monitor NetWare printers in step 5.
c
Caution:
If you have dial-up routers, they may automatically dial up the
next hop and you are likely to be charged for the line connection
depending on the number of hops you set. To prevent this and
to keep network traffic to a minimum, set hops carefully. For
more information, see "Monitoring printers beyond routers" on
page 11-31.
EPSON Status Monitor 2 (Windows Only) 11-5