Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 51
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
1.
Turn on the printer.
2.
Run EPSON Net!2 from the Start menu.
3.
The EPSON Net!2 dialog box appears showing a list of interface
cards on the network. Select the printer you want to configure
from the list and click Configuration.
Note:
If you have connected more than one printer with the same type of
Ethernet card to the network, you can identify the cards by their
MAC (Media Access Control) addresses. To view a card's MAC
address, press the status sheet button on the card for three
seconds. See Chapter 1 for details.
If the IP address is set to the default, the printer model might not
appear.
Using the Ethernet Card with NetWare 4-7
Advertisement
Table of Contents
Need help?
Do you have a question about the C823642 - Enet Print Server Type B Multi Protocol 10/100BTX and is the answer not in the manual?
Questions and answers