Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 54
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
2.
Run PCONSOLE. From the Available Options screen, select Print
Queue Information and press Enter.
3.
Press the Insert key on your keyboard and enter the print queue
name. Press Enter.
Select the print queue name that you just entered and press Enter.
4.
5.
From the Print Queue Information list, select Queue Users and
press Enter.
6.
Select EVERYONE from the list. If EVERYONE is not in the list,
press Insert and select EVERYONE from the queue user list.
Creating a print server
From the Available Options screen, select Print Server
1.
Information and press Enter.
2.
Press the Insert key on your keyboard and enter the print server
name. Press Enter. Write down the print server name for later
use.
3.
From the Print Server list, select the print server name that you
just entered and press Enter.
4-10 Using the Ethernet Card with NetWare
Advertisement
Table of Contents
