Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 186

The status information does not match the real status of the
printer.
Cause
EPSON Status Monitor 2
monitors the printer at
intervals set in the
Monitoring Preferences
dialog box. A long interval
may result in incorrect
information.
NetWare printers cannot be monitored.
Cause
You are using EPSON Net!2. You cannot use EPSON Status
You can only monitor NetWare printers in Remote Printer mode
if the printer port number is set to 0.
Cause
This is set internally by
EPSON Status Monitor 2.
12-8 Troubleshooting
What to do
Click Refresh on the View menu to
update the information.
Decrease the monitoring interval in
the Monitoring Preferences dialog
box if you find that the Status
Monitor often displays data that is
old.
Wait until the next monitoring
interval and check the information
again.
What to do
Monitor 2 and EPSON Net!2 at the
same time. Quit EPSON Net!2 and
use EPSON Status Monitor 2. If you
use EPSON Net!2, quit EPSON Status
Monitor 2 in advance.
What to do
Use the NetWare control tool to set
the port number to 0.