Setting Up For Ibm Aix 3.2.5 Or Later And 4.1.3 Or Later - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Setting up for IBM AIX 3.2.5 or later and 4.1.3 or later
In the following steps, substitute the name you will use to configure
your printer's Ethernet card on the network for HOSTNAME.
Substitute the printer name that users will send print jobs to for
Rprinter.
1.
Add the IP address and printer host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2.
Run smit.
For example:
smit printer
3.
Set the printer name (for example: Rprinter) in:
"Manage Remote Printer"
"Client Services"
"Remote Printer Queues"
"NAME of queue to add"
Set the host name (for example: HOSTNAME) in:
"DESTINATION HOST for remote jobs"
Set the port name (for example: aux) in:
"Name of QUEUE on remote printer"
Use the lpr command to print.
For example:
lpr -PRPrinter Print-File-Name
9-4 Using the Ethernet Card with UNIX
Advertisement
Table of Contents
Need help?
Do you have a question about the C823642 - Enet Print Server Type B Multi Protocol 10/100BTX and is the answer not in the manual?
Questions and answers