Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 91

AppleTalk Setting:
Zone Name:
Select the network zone in which you want the printer to
appear. If the zone has not been set, a " " appears.
Network Number Set:
Select the network number setting. In most cases, you should
select Auto.
Network Number for Manual Mode:
The default number is 65535. If you have selected Auto for
the network number setting, you cannot type the network
number manually.
Note:
If you cannot see the printer in the Chooser, make sure your AppleTalk
routers have been set up correctly. If you cannot change the router
settings, select Manual under Network Number Set and type a
network number in the Network Number for Manual Mode box
as a temporary solution. You must type the correct zone and the network
number of the zone. If setting is not made correctly, you cannot
configure the Ethernet card for use with the Macintosh.
Try one of the following:
Start the browser from EPSON Net!2 for Windows and configure
the Ethernet card again.
Configure the Ethernet card using the card's home page (TCP/IP
must be set correctly).
Re-initialize the Ethernet card. See page 1-6.
6. Click the Send button to save the new settings to the Ethernet
card. If the message "Configuration is successfully done"
appears, the update is complete.
Using the Ethernet Card with Macintosh 5-5