Using The Ethernet Card In Remote Printer Mode - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

6. Click OK to save your changes. If the message "Configuration is
successfully done" appears on your screen, the update is
complete.
c
Caution:
Once you make changes to the Ethernet card, you must wait
until it registers the settings (up to two minutes) before turning
off the printer.
7. In the File Server Console's MONITOR.NLM, open the
Connection Information. Check if the print server name assigned
to the Ethernet card is logged in to the Active Connections list. It
takes up to five minutes for this information to appear.

Using the Ethernet card in Remote Printer mode

This section explains how to configure the Ethernet card in Remote
Printer mode using the Nwadmin tool in NetWare 4.x.
If the client does not correspond to NDS, use the Bindery context.
1. Log in to the NDS tree (or to the server with Bindery context) with
admin or supervisor privileges.
2. Run the administrator tool (Nwadmin).
3. Create a printer:
Click the directory context icon (or Bindery context), and select
Object, then Create, and then Printer. Type the printer name
and click Create.
Using the Ethernet Card with NetWare 4-25