Using A Dial-Up Network; Using A Dial-Up Network In Each Mode - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

4. The file server list appears.
5. Click the file server in which you want to create a queue, and click
New. The setting screen appears.
6. Type the queue name and printer name (up to 47 characters), and
select the print server name you want to assign. Then click OK.
7. When you want to delete a queue, click the queue in the list, and
click Delete.

Using a Dial-Up Network

This section covers important information about using a dial-up
network.
Note:
The primary server described in this manual is a primary time server, which
offers time to the workstations on the network.

Using a dial-up network in each mode

Print Server mode
Since polling is performed on the file server in print server
mode, you must use a dedicated dial-up line.
Remote Printer mode
In Remote Printer mode, the primary server can be located
at the dial-up destination. However, an extra account might
be generated when the primary server is down. To avoid this
problem, use connections via a dedicated dial-up line.
4-38 Using the Ethernet Card with NetWare